P-280-51 Parker replacement filter – 2–200μm, reusable.

Product Update: Aite P-280-51 Replacement Filter Element

1. Product Introduction

Aite P-280-51 Replacement Filter Element is engineered as a fully interchangeable substitute for original Parker models – maintaining identical dimensional parameters, interface specifications, and filtration performance to enable direct drop-in installation without any housing modifications. Aite P-280-51 Replacement Filter Element delivers reliable filtration performance across a wide range of industrial applications.

As a professional manufacturer specializing in import substitution filter consumables, we deliver Aite P-280-51 Replacement Filter Element with stable filtration performance, significantly shorter delivery cycles, and substantially lower procurement costs for industrial facilities worldwide.

---

2. Product Characteristics

Aite P-280-51 Replacement Filter Element delivers superior performance through the following key characteristics:

2.1 Good Filtration Performance

Aite P-280-51 Replacement Filter Element provides uniform surface filtration performance for particle sizes ranging from 2μm to 200μm – effectively capturing contaminants across a broad spectrum.

2.2 Excellent Durability

Aite P-280-51 Replacement Filter Element offers corrosion resistance, heat resistance, pressure resistance, and wear resistance – ensuring reliable performance in demanding operating conditions.

2.3 Uniform Pores & Accurate Filtration

Aite P-280-51 Replacement Filter Element features uniform pores with accurate filtration accuracy – ensuring consistent contaminant capture and reliable performance.

2.4 Reusable Design

Aite P-280-51 Replacement Filter Element is suitable for various hydraulic environments – after cleaning can be used again, reducing replacement frequency and maintenance costs.

Aite P-280-51 Replacement Filter Element offers equivalent performance to genuine Parker parts at 40%–60% lower cost – making it an ideal choice for cost-conscious maintenance programs.

3. Matters Needing Attention

Aite P-280-51 Replacement Filter Element installation and use require attention to the following:

A. The filter should be near the use point and at the lowest temperature – do not exceed the specified pressure and temperature.

B. Please clean and install the pipes before installation to ensure the pipes are free of sundries and the filter runs normally.

C. It should be installed vertically. Proper space should be left at the bottom during installation to ensure normal filter element replacement. Before installing the compressed air filter, check the filter level and install from low precision to high precision.

D. There is no need to set up bypass, because the compressed gas filter basically does not need maintenance. However, it is necessary to check the drainage condition of the drainer frequently.

E. Pay attention to the import and export direction during installation.

F. Note before use: The valve can be opened for trial operation under the condition that the connection mode, grade sequence, and pipeline sealing condition are all correct.

G. When opening the valve, open it slowly. Never open it instantaneously. Instant opening will cause instant impact on the filter element and damage the filter element.

H. If the drainage of the automatic drainer is not smooth, please clean the automatic drainer. Soak the disassembled drainer in a dishwashing liquid solution and rinse it off with clean water after 10 minutes.

I. The filter element should be replaced after 4000 hours of use. The replacement time can be changed appropriately according to different working conditions, but the maximum time shall not exceed 15 months.

4. Technical Specifications

Parameter Specification

Rated Flow 80–200 L/min

Working Pressure 1.5–2.5 Pa

Filtration Area 0.01–0.20 m²

Filtration Accuracy 2–200μm

Replacement Interval 4000 hours (max 15 months)

Installation Vertical installation

Cleaning Reusable after cleaning

Aite P-280-51 Replacement Filter Element delivers reliable filtration performance across a wide range of industrial applications – protecting critical components and ensuring clean fluid output.

5. Application Fields

Aite P-280-51 Replacement Filter Element is widely used across diverse industrial sectors:

Industry Typical Applications

Petrochemical Oil field pipeline filtration, refueling equipment, construction machinery equipment

Fuel Filtration Fuel filtration and water treatment industry equipment filtration

Pharmaceutical & Food Pharmaceutical and food processing fields

Electronics Electronic industry pretreatment and post-processing systems

Chemical Chemical industry pretreatment and post-processing systems

Water Treatment Further purification of low suspended impurities (less than 2–5 mg/L)

Aite P-280-51 Replacement Filter Element is suitable for a wide range of filtration applications – providing reliable performance across multiple industries.

6. Frequently Asked Questions (FAQ)

Q1: What is the Aite P-280-51 Replacement Filter Element designed for?

A: Aite P-280-51 Replacement Filter Element is designed as a fully interchangeable substitute for original Parker filter elements – suitable for petrochemical, pharmaceutical, food processing, electronics, chemical, and water treatment applications.

Q2: What is the filtration accuracy of the Aite P-280-51 Replacement Filter Element?

A: Aite P-280-51 Replacement Filter Element offers filtration accuracy from 2μm to 200μm – providing uniform surface filtration performance.

Q3: Can the Aite P-280-51 Replacement Filter Element be cleaned and reused?

A: Yes. Aite P-280-51 Replacement Filter Element is suitable for various hydraulic environments and can be used again after cleaning – reducing replacement frequency and maintenance costs.

Q4: What is the recommended replacement interval for the Aite P-280-51 Replacement Filter Element?

A: Aite P-280-51 Replacement Filter Element should be replaced after 4000 hours of use – with replacement time adjustable according to working conditions but not exceeding 15 months.

Q5: What are the installation requirements for the Aite P-280-51 Replacement Filter Element?

A: Aite P-280-51 Replacement Filter Element should be installed vertically with proper space at the bottom. Pay attention to import and export direction. Open the valve slowly to avoid instant impact damage.

Q6: What are the working parameters of the Aite P-280-51 Replacement Filter Element?

A: Aite P-280-51 Replacement Filter Element has a rated flow of 80–200 L/min, working pressure of 1.5–2.5 Pa, filtration area of 0.01–0.20 m², and filtration accuracy of 2–200μm.

Q7: How should the automatic drainer be maintained for the Aite P-280-51 Replacement Filter Element?

A: If drainage is not smooth, clean the automatic drainer by soaking it in dishwashing liquid solution and rinsing with clean water after 10 minutes.

Q8: What documentation is provided with the Aite P-280-51 Replacement Filter Element?

A: Each shipment includes material certificates, filtration performance test reports, dimensional inspection records, and factory quality certificates – ensuring smooth customs clearance.

Q9: Can the Aite P-280-51 Replacement Filter Element be customized?

A: Yes. Custom options for Aite P-280-51 Replacement Filter Element include special filtration accuracy, filter materials, and dimensions – based on site-specific requirements.

Q10: What industries use the Aite P-280-51 Replacement Filter Element?

A: Aite P-280-51 Replacement Filter Element is widely used in petrochemical, pharmaceutical, food processing, electronics, chemical, and water treatment industries.

Q11: How does the Aite P-280-51 Replacement Filter Element compare to genuine Parker parts?

A: Aite P-280-51 Replacement Filter Element delivers equivalent filtration performance and service life to genuine Parker parts – while offering significant cost savings and shorter delivery times.

Q12: Can I order samples of the Aite P-280-51 Replacement Filter Element before bulk purchase?

A: Yes. We support paid sample orders with production lead time of approximately 5–7 days. Sample costs are fully deductible from your first bulk order upon approval.

Aite P-280-51 Replacement Filter Element – 2–200μm filtration accuracy, corrosion/heat/pressure/wear resistant, reusable after cleaning, 4000-hour replacement interval, fully interchangeable with Parker original. Contact us today for a free cross-reference check and competitive factory-direct quotation within 24 hours.