HYDAC OF5L10P3M2B10E Replacement Filter Cart – Mobile Offline Oil Purification Unit

Core Advantages

Complete Interchangeability

All mounting dimensions, flow specifications, and filter element interfaces conform 

to HYDAC OF5L10P3M2B10E standards. The unit is compatible with both genuine HYDAC filter 

elements and our cost-effective replacement cartridges. Installation requires no modification 

to existing pipelines or systems.

Multi-Stage Graded Filtration System

Equipped with suction strainer, primary coarse filtration, and high-efficiency fine filtration 

modules. An optional coalescing dehydration assembly removes free water from oil. 

Gradient glass fiber filter media captures metal wear debris, rubber sludge, and fine particulates,

 maintaining fluid cleanliness to ISO 4406 standards.

Mobile Compact Design

Sturdy trolley frame with shock-absorbing casters enables single-unit service across multiple 

hydraulic stations, CNC equipment, and lubrication loops within the workshop. 

This optimizes asset utilization and avoids redundant investment in fixed purification equipment.

Comprehensive Safety and Monitoring

Built-in differential pressure indicator signals when to replace saturated filter elements.

 Motor overload protection prevents pump damage under blocked suction conditions. 

Reserved sampling ports support regular oil quality testing for scientific fluid management.

---

Technical Parameters

Parameter Specification

Product type HYDAC OF5L10P3M2B10E replacement filter cart (mobile)

Applicable fluids Mineral hydraulic oil, gear lubricating oil, anti-flame hydraulic media

Filtration stages Suction strainer + coarse filtration + fine filtration (optional coalescing 

dehydration)

Filter media Gradient glass fiber composite

Interchangeability Full dimensional and interface compatibility with original HYDAC OF series

Configuration Mobile trolley with shock-absorbing casters

Safety features Differential pressure indicator, motor overload protection, sampling ports

Optional functions Coalescing dehydration assembly, custom specifications

Recommended application Kidney-loop offline circulation, oil regeneration, system flushing

---

Typical Application Scenarios

Scenario Description

New oil pre-filtration Pre-filter barreled industrial oil before filling hydraulic reservoirs

In-service oil regeneration Kidney-loop offline purification during production downtime

System flushing Pipeline cleaning after overhaul of pumps, valves, and cylinders

Waste oil pre-treatment Pre-treatment of collected waste oil to improve re-refining value

---

Economic and Environmental Benefits

Benefit Area Impact

Extended oil life Reduces frequency of full oil replacement and hazardous waste oil discharge

Extended filter life Lowers consumption of oil-contaminated spent cartridges

Reduced procurement cost Cuts expenditure on fresh industrial oil

Lower disposal fees Reduces costly hazardous waste disposal charges

Reduced equipment wear Stabilizes oil cleanliness; extends pump, bearing, and valve overhaul 

cycles

---

Important Risk Reminder

Many low-cost copied filter carts replicate only exterior appearance. Mismatched pump flow,

 inferior sealing, and non-standard filter interfaces lead to rapid clogging, media rupture, 

oil leakage, and accelerated fluid contamination.

Our replacement filter carts undergo strict factory performance testing. We support 30–60 days 

of on-site trial operation. Hydraulic parameter test reports are available upon request.

---

Operation Guidance

Item Recommendation

Filter replacement Replace based on differential pressure alarm — not on fixed time intervals

Pre-operation inspection Check hoses and sealing gaskets before each use to prevent leaks

Filtration schedule Establish regular offline filtration routines to maximize oil recycling efficiency

Oil sampling Use reserved sampling ports for periodic oil quality testing

---

Frequently Asked Questions

Q1: Can this filter cart work with genuine HYDAC filter elements?

A1: Yes. The housing and installation dimensions fully comply with HYDAC specifications, 

supporting both original HYDAC elements and our replacement filters.

Q2: What types of industrial fluids are suitable for this unit?

A2: Mineral hydraulic oil, gear lubricating oil, and conventional anti-flame hydraulic media.

Q3: Is on-site equipment modification required during installation?

A3: No. The unit achieves full dimensional interchangeability for quick replacement without 

pipeline modification.

Q4: What filtration stages does the unit include?

A4: The system includes a suction strainer, primary coarse filtration, and high-efficiency fine

 filtration. An optional coalescing dehydration module is available for free water removal.

Q5: How often should filter elements be changed?

A5: Replace when the differential pressure indicator reaches the alarm level. Fixed-interval 

replacement is not recommended, as it varies with contamination load and usage frequency.

Q6: Can one unit serve multiple machines?

A6: Yes. The mobile design allows the unit to be moved between hydraulic stations, CNC machines,

 and lubrication loops within the workshop.

Q7: What safety features are included?

A7: The unit includes a differential pressure indicator, motor overload protection, 

and optional emergency stop functions.

Q8: What documentation is provided with each shipment?

A8: EN 10204 material certificates, factory performance test reports, dimensional inspection records,

 and an operating manual are supplied for all orders.

---

Summary

The HYDAC OF5L10P3M2B10E replacement filter cart is a mobile offline oil purification unit

 offering complete interchangeability with the original HYDAC OF series. With multi-stage filtration, 

optional coalescing dehydration, and rugged trolley construction, it supports oil regeneration,

 reduces waste, and lowers operating costs across hydraulic and lubrication systems.

Contact our technical team for detailed datasheets, customized configurations, and trial order

 support.