71121111-48020 Air compressor filter element

Product introduction

71121111-48020 Air compressor filter element is to enter the oil-bearing compressed air generated by the host into the cooler after mechanical separation into the oil and gas filter element for filtration, intercept and aggregate the oil mist in the gas, and form oil droplets to concentrate at the bottom of the filter element and return to the compressor lubrication system via the return tubing. Make the compressor discharge more pure, high quality compressed air; Simply put, it is a device that removes solid dust, oil and gas particles and liquid substances from compressed air.

Product parameter

Raw water pressure: 0.24MPa

Inlet and outlet caliber: 200mm

Properties: Acid and alkali resistance

Filter element style: folding filter element

Weight: 3kg

Maximum working pressure difference: 2MPa

Filtration accuracy: 10um

Replacement process

1. Stop the air compressor, close the air pressure outlet, open the drain valve, and confirm that there is no pressure in the system.

2. Disassemble the pipe above the oil and gas barrel and remove the pipe from the pressure maintenance valve outlet to the cooler.

3. Remove the return oil pipe.

4. Remove the bolts from the cover of the oil and gas drum and remove the cover of the oil and gas drum.

5. Remove the oil and gas separator and replace it with a new one.

6. Assemble them in reverse order.