Air filter element 9610512-N0800-H1

Product introduction

Air filter element 9610512-N0800-H1 is to enter the oil-bearing compressed air produced by the main engine into the cooler, which is mechanically separated into the oil and gas filter element for filtration. The oil mist in the gas is intercepted and polymerized to form oil droplets concentrated at the bottom of the filter element and returned to the compressor lubrication system through the return pipe, so that the compressor can discharge more pure and high-quality compressed air. Simply put, it is a device that removes solid dust, oil and gas particles and liquid substances from compressed air.

Product parameter

Brand: FUSHENG

Service life: 2500h

Filter material style: folding wave

Weight: 3kg

Filtration accuracy: 5-10um

Processing customization: Yes

Filter material type: imported filter material

Initial pressure: 0.0012wMPa

End cover material: high strength steel plate

Product principle

Oil and gas separation filter element is the key component to determine the discharge quality of compressed air in oil injection screw compressor. In the correct installation use and good maintenance, can ensure the quality of compressed air and the service life of the filter element. The air compressed from the main head of the screw compressor contains oil droplets of different sizes. Large oil droplets are easily separated through the oil and gas separation tank, while small oil droplets (in suspension form) are filtered through the micron glass fiber filter material of the oil and gas separation filter element. The correct selection of diameter and thickness of glass fiber is an important factor to ensure the filtering effect. After the oil mist is intercepted, diffused and polymerized by the filter material, the small oil droplets quickly polymerize into large oil droplets, which pass through the filter layer under the action of pneumatic and gravity and settle at the bottom of the filter element. These oils are continuously returned to the lubrication system through the return tubing inlet at the bottom of the hollow of the filter element, so that the compressor can discharge relatively pure, high quality compressed air.